The Adams Driveshaft Extreme Duty Series Front 1350 Half Round CV Driveshaft with Solid Non-Greasable U-Joints (part number ASDXJ-1350CVF-S) is custom manufactured for 1984–2001 Jeep XJ Cherokee — front position. Compatible with tires up to 42 inches tall. Each driveshaft is built to order using a measurement provided by the customer taken at ride height.

T-Case Linkage Note: In some cases the yoke may contact the transfer case linkage. If this occurs, the linkage may need to be moved, adjusted, or converted to a cable-style linkage.

1350 Half Round Series: The half round CV joint design accommodates the front differential and transfer case geometry specific to the XJ Cherokee. The 1350 series handles significantly higher torque loads than the 1310 series — the correct upgrade for builds running tires larger than 37 inches.

Construction: Built from 2" × .120 wall DOM tubing with solid non-greasable 1350 series U-joints — the strongest U-joints Adams Driveshaft offers. All components sourced exclusively from Spicer and Neapco — two American manufacturers. Finished in gloss black show quality paint.

What's in the Box:

• (1) 1350 solid non-greasable U-joint 2" × .120 wall rock crawler CV driveshaft
• (1) 1350 front half round 26-spline transfer case output shaft yoke
• (1) 1350 front Dana 30, Dana 44, or Dana 60 forged pinion yoke
• (4) Grade 10 CV bolts with small heads for easy installation

Fitment: 1984–2001 Jeep XJ Cherokee — front position | up to 42" tires. Custom built to your vehicle's measurement taken at ride height.

Part Number: ASDXJ-1350CVF-S

Warranty: Lifetime warranty on welds and tubing if they break due to torque. No warranty if components break due to bad angles. U-joints and CV kit are wear items and must be greased every 3 months or 3,000 miles, whichever comes first — no warranty coverage without proper maintenance.