Adams Driveshaft JT Gladiator Rubicon - Overland - Sport - Mojave Front 1350 CV Driveshaft OEM Flange Style Extreme Duty Series

New front extreme duty Jeep JT Gladiator Rubicon, Overland, Sport, Mojave 1350 series half round CV driveshaft with OEM flange on the front. Custom made by Adams Driveshaft.

This extreme duty series solid 1350 CV driveshaft will work up to 42" tall tires. Bigger tires add more weight, traction, and more pressure on your drivetrain components like your driveshafts, axles, gears, etc., so you want to make sure you are buying the right driveshaft for your Jeep. This driveshaft will work up to a 6" lift after that the angle may be too severe or it may bind.

Fitment

• Fits Jeep JT Gladiator Rubicon, Overland, Sport and Mojave models. Not for 392 models.
• Driveshafts are built to length; depending on lift height and setup, a measurement may be needed to build the correct length.

Features and Benefits

• Made out of 2" x .120 wall D.O.M. tubing that is double the strength of the factory tubing and will clear the exhaust and cross member eliminating damage to the driveshaft at full droop.
• Has long 1 1/2" full spline slip n stub unlike competitors that use a 1 3/8 slip n stub.
• Built only with components made by Adams Forged, Spicer and Neapco.
• Has the strongest solid non greasable u-joints on the market.
• Has a heavy duty flange on it that fits your OEM pinion flange so it is easier to install and you won't disturb the crush sleeve.
• Comes with Grade 10 CV bolts with small heads on them so they are easier to install and a packet of Loctite.

What's in the Box

• (1) 2" x .120 wall extreme duty 1350 CV driveshaft with solid non greasable u-joints, with an OEM style flange.
• (1) American made front 1350 half round transfer case output shaft yoke.
• (4) Grade 10 CV bolts.

Details

• Warranty: Driveshaft: lifetime warranty on the welds and tubing if they break due to torque.

Product information

• Part number: ASDJT-1350HRF-S-HVHK
• Fitment: Jeep Gladiator JT
• Weight: 35.0 lb