The GT-3 Hyper Speed ASA filament combines rapid print speeds of up to 500 mm/s with exceptional print quality. Experience consistently amazing results by giving your high-speed printer a turbo boost! We recommend a printing speed of around 300 mm/s for optimal results.

When using adhesive, follow these guidelines:

1. Clean the print bed with water, soap, or alcohol. Ensure the build plate is clean and free from any previous adhesive residue.
2. Squeeze the bottle and apply the adhesive evenly to the print area using a spatula or other applicator.
3. Heat the build plate to the recommended temperature for ASA, typically around 90-110°C.
4. Remove the object:

• When the printing temperature is below 300°C, wait for the print bed to cool down before removing the printed object.
• When the printing temperature is above 300°C, it is recommended to remove the printed object as soon as possible.
• When using ABS on a glass print bed, it is suggested to first apply painter's tape or a similar material to the glass surface. Afterward, apply adhesive to further protect the surface and reduce the risk of glass bed breakage.