•
2000 - 2010 Chevy/GMC 2500/3500

Product Description: 
We are proud to bring you our Heavy Duty fabricated rear lift blocks. These CNC cut, jig welded blocks are much stronger and more versatile than other options on the market as we can build them to any size and configuration needed to get you the exact ride height you are looking for. We offer these with and without pinion angle correction in 1/2" height increments from 2 to 10 inches of lift!

You will notice 3 different holes on the top. The center hole is the most commonly used hole, but if you wish to relocate your axle forward or rearward in the fender well you can do that by using either the front or the back hole. We chose to offer this option after seeing alot of trucks with the wheel really forward in the axle opening, this gives you a chance to easily rectify that issue if your truck has it. 

 

IMPORTANT NOTE: We do not recommend stacking blocks, so to determine the height block you need to get the amount of lift you are looking to achieve you must take into consideration the height of the existing block. For example, if you are wanting to raise the rear 3 inches and you currently have a factory 3 inch block then you would need to order a 6 inch block to replace the existing block and net the additional 3" of lift. 

 

Kit Contains:

Two Rear Lift Blocks (mounting hardware not included) 

Pro Form Fab 2000-2010 Chevy/GMC 2500/3500 Rear Lift Blocks

SKU sku-48235916361978
$119.95
$119.95
Lift Amount:
Pinion Angle Corrections:
Color:
2000 - 2010 Chevy/GMC 2500/3500

Product Description: 
We are proud to bring you our Heavy Duty fabricated rear lift blocks. These CNC cut, jig welded blocks are much stronger and more versatile than other options on the market as we can build them to any size and configuration needed to get you the exact ride height you are looking for. We offer these with and without pinion angle correction in 1/2" height increments from 2 to 10 inches of lift!

You will notice 3 different holes on the top. The center hole is the most commonly used hole, but if you wish to relocate your axle forward or rearward in the fender well you can do that by using either the front or the back hole. We chose to offer this option after seeing alot of trucks with the wheel really forward in the axle opening, this gives you a chance to easily rectify that issue if your truck has it. 

 

IMPORTANT NOTE: We do not recommend stacking blocks, so to determine the height block you need to get the amount of lift you are looking to achieve you must take into consideration the height of the existing block. For example, if you are wanting to raise the rear 3 inches and you currently have a factory 3 inch block then you would need to order a 6 inch block to replace the existing block and net the additional 3" of lift. 

 

Kit Contains:

Two Rear Lift Blocks (mounting hardware not included) 

FREQUENTLY BOUGHT TOGETHER

Complementary products