-
files/zspec_m3_clip-replacement_solution_swatch_with_logo2_square.png
-
files/zspec_clip-replacements_titanium_hardware_kit_instructions_a6c2c3b6-e45f-45a1-b443-fe59b8c0813f.png
-
files/ZSPEC_Plastic_Clip_Replacements_350z_front-bumper_0803c750-783a-4835-be29-886bdfdf8148.png
-
files/zspec_plastic_clip-replacements_titanium_nissan-frontier-d41_1_66829b03-cf0e-411c-af45-6e71a9ac64a9.png
-
files/zspec_plastic_clip-replacements_titanium_nissan-frontier-d41_5_0d6ee9a6-c60d-4abb-8b68-f46967ac6069.png
-
files/zspec_m3_clip-replacement_solution_black_5fc7c4cd-a404-449a-9899-8ac0199dde02.png
-
files/zspec_m3_clip-replacement_solution_blue_9369704f-9f51-4667-9cf6-b963fbf8e23e.png
-
files/zspec_m3_clip-replacement_solution_burned_01718067-bf27-47bc-855c-5eba6ad52bb8.png
-
files/zspec_m3_clip-replacement_solution_gold_6fbd78dd-cb5a-402a-b1d7-9edf7788498b.png
-
files/zspec_m3_clip-replacement_solution_purple_08923074-7c13-4125-8111-701459dd92f5.png
-
files/zspec_m3_clip-replacement_solution_red_22b890e7-8095-4ff6-a6ed-c45834400a64.png
-
files/zspec_m3_clip-replacement_solution_silver_e296e29a-9aaf-4009-a14e-ae358dc4d4a2.png
Many manufacturer's have implemented an increasing amount of plastic "paneling" over areas of a vehicle's engine-bay and the clips often break or get marred-up when being removed. These clips, while not overly expensive in some cases are an ongoing headache and never look "good".
ZSPEC has developed clip-replacement solutions leveraging our famous titanium hardware coupled with Well Nuts.
Installation instructions are straight-forward:
1) Remove OE plastic clips and push ZSPEC Well Nuts into Clip Holes on body of vehicle (under plastic panels).
2) Position panel back in place and hand-start each titanium fastener with the included washer.
3) Tighten the fasteners and enjoy. Note, each fastener needs "snugged" in place...the back-side of each well nut will "bulge" holding the panel in place.
Why ZSPEC's Dress Up Bolts® hardware solution?
- Grade-5 Titanium Fasteners and Washers
- Completely reversible (no drilling like others)
Requires basic hand tools for installation: plastic pry tool to remove clips and #5 hex-key for installation of the ZSPEC hardware (not included).
Note - this solution works best with holes ~7.3-7.5mm in diameter. If your need varies greatly, check out our other listings with alternate sizes. This listing uses a LONGER well nut than our other M4 solution and sometimes works better if you have aftermarket carbon-fiber panels that may not sit as flush (and thus require a longer well nut which would "bulge" / grip more when tightened).
Common (known) fitments/use for this size: Nissan 350z/370z/RZ34, Infiniti G/Q service panel covers and radiator air-guides. Note, 350z front "bumper" clips require using our M5 replacement solution...and 300zx Z32 "Cowls" will use our M3.
- Regular price
- $5.10
- Regular price
- $5.10
Many manufacturer's have implemented an increasing amount of plastic "paneling" over areas of a vehicle's engine-bay and the clips often break or get marred-up when being removed. These clips, while not overly expensive in some cases are an ongoing headache and never look "good".
ZSPEC has developed clip-replacement solutions leveraging our famous titanium hardware coupled with Well Nuts.
Installation instructions are straight-forward:
1) Remove OE plastic clips and push ZSPEC Well Nuts into Clip Holes on body of vehicle (under plastic panels).
2) Position panel back in place and hand-start each titanium fastener with the included washer.
3) Tighten the fasteners and enjoy. Note, each fastener needs "snugged" in place...the back-side of each well nut will "bulge" holding the panel in place.
Why ZSPEC's Dress Up Bolts® hardware solution?
- Grade-5 Titanium Fasteners and Washers
- Completely reversible (no drilling like others)
Requires basic hand tools for installation: plastic pry tool to remove clips and #5 hex-key for installation of the ZSPEC hardware (not included).
Note - this solution works best with holes ~7.3-7.5mm in diameter. If your need varies greatly, check out our other listings with alternate sizes. This listing uses a LONGER well nut than our other M4 solution and sometimes works better if you have aftermarket carbon-fiber panels that may not sit as flush (and thus require a longer well nut which would "bulge" / grip more when tightened).
Common (known) fitments/use for this size: Nissan 350z/370z/RZ34, Infiniti G/Q service panel covers and radiator air-guides. Note, 350z front "bumper" clips require using our M5 replacement solution...and 300zx Z32 "Cowls" will use our M3.
