-
files/zspec_plastic-clip-replacements_swatch_m4x22_with_well_nut_799934ae-2156-4b87-9801-d456fa57d98f.png
-
files/zspec_nissan_z33_titanium_plastic-clips-replacements_kit_04_aedba1c2-ff21-4dd7-bfa9-6fa168db51d8.jpg
-
files/zspec_clip-replacements_titanium_hardware_kit_instructions_45d491a2-5933-4993-ae16-69f0440328dc.png
-
files/zspec_nissan_z33_titanium_plastic-clips-replacements_kit_09_cb726771-1c90-4d6d-a655-3d588d7caf34.jpg
-
files/zspec_nissan_z33_titanium_plastic-clips-replacements_kit_05_6ec9a77d-f4e6-40ab-a350-cd801cb00173.jpg
-
files/zspec_titanium_clip-replacement_solution_M4x22_silver.png
-
files/zspec_titanium_clip-replacement_solution_M4x22.png
-
files/zspec_titanium_clip-replacement_solution_M4x22_blue.png
-
files/zspec_titanium_clip-replacement_solution_M4x22_black.png
-
files/zspec_titanium_clip-replacement_solution_M4x22_gold.png
-
files/zspec_titanium_clip-replacement_solution_M4x22_purple.png
Many manufacturer's have implemented an increasing amount of plastic "paneling" over areas of a vehicle's engine-bay and the clips often break or get marred-up when being removed. These clips, while not overly expensive in some cases are an ongoing headache and never look "good".
ZSPEC has developed clip-replacement solutions leveraging our famous titanium hardware coupled with Well Nuts.
Installation instructions:
1) Remove OE plastic clips and push ZSPEC Well Nuts into Clip Holes on body of vehicle (under plastic panels).
2) Position panel back in place and hand-start each titanium fastener with the included washer.
3) Tighten the fasteners and enjoy. Note, each fastener needs "snugged" in place...the back-side of each well nut will "bulge" holding the panel in place.
Why ZSPEC's Dress Up Bolts® hardware solution?
- Grade-5 Titanium Fasteners and Washers
- Completely reversible (no drilling like others)
Requires basic hand-tools for installation: plastic pry tool to remove clips and #5 hex-key for installation of the ZSPEC hardware (not included).
Note - this solution works best with holes ~7.3-7.5mm in diameter. If your need varies greatly, check out our other listings with alternate sizes.
Common (known) fitments/use for this size: Nissan 350z/370z/RZ34, Infiniti G/Q service panel covers and radiator air-guides. Note, 350z front "bumper" clips require using our M5 replacement solution.
- Regular price
- $5.10
- Regular price
- $5.10
Many manufacturer's have implemented an increasing amount of plastic "paneling" over areas of a vehicle's engine-bay and the clips often break or get marred-up when being removed. These clips, while not overly expensive in some cases are an ongoing headache and never look "good".
ZSPEC has developed clip-replacement solutions leveraging our famous titanium hardware coupled with Well Nuts.
Installation instructions:
1) Remove OE plastic clips and push ZSPEC Well Nuts into Clip Holes on body of vehicle (under plastic panels).
2) Position panel back in place and hand-start each titanium fastener with the included washer.
3) Tighten the fasteners and enjoy. Note, each fastener needs "snugged" in place...the back-side of each well nut will "bulge" holding the panel in place.
Why ZSPEC's Dress Up Bolts® hardware solution?
- Grade-5 Titanium Fasteners and Washers
- Completely reversible (no drilling like others)
Requires basic hand-tools for installation: plastic pry tool to remove clips and #5 hex-key for installation of the ZSPEC hardware (not included).
Note - this solution works best with holes ~7.3-7.5mm in diameter. If your need varies greatly, check out our other listings with alternate sizes.
Common (known) fitments/use for this size: Nissan 350z/370z/RZ34, Infiniti G/Q service panel covers and radiator air-guides. Note, 350z front "bumper" clips require using our M5 replacement solution.
