-
files/zspec_plastic-clip-replacements_m5x22_swatch-square_33c6eaf2-204a-45ce-b550-78396bb217e1.png
-
files/zspec_nissan_z34_titanium_plastic-clips-replacements_kit_04_9e043db9-c5d2-4295-bdda-86dd00284929.jpg
-
files/zspec_clip-replacements_titanium_hardware_kit_instructions_24569875-4dec-42e9-b201-5fcbf20c22f4.png
-
files/ZSPEC_Plastic_Clip_Replacements_350z_front-bumper.png
-
files/zspec_nissan_rz34_titanium_plastic-clips-replacements_kit_05_9fa3a34b-db37-46cf-beb1-dcb85f12b927.jpg
-
files/zspec_nissan_z34_titanium_plastic-clips-replacements_kit_08_b1d5422c-fbc7-4b7f-b509-65e401e5f2ee.jpg
-
files/zspec_titanium_clip-replacement_solution_M5x22.png
-
files/zspec_titanium_clip-replacement_solution_M5x22_black.png
-
files/zspec_titanium_clip-replacement_solution_M5x22_blue.png
-
files/zspec_titanium_clip-replacement_solution_M5x22_gold.png
-
files/zspec_titanium_clip-replacement_solution_M5x22_purple.png
-
files/zspec_titanium_clip-replacement_solution_M5x22_silver.png
Many manufacturer's have implemented an increasing amount of plastic "paneling" over areas of a vehicle's engine-bay and the clips often break or get marred-up when being removed. These clips, while not overly expensive in some cases are an ongoing headache and never look "good".
ZSPEC has developed clip-replacement solutions leveraging our famous titanium hardware coupled with Well Nuts. This solution is our "M5" based fastener and well nut hardware - VERIFY the hole-size before ordering, we offer another smaller "M4" and "M3" versions as well.
Installation instructions:
1) Remove OE plastic clips and push ZSPEC Well Nuts into Clip Holes on body of vehicle (under plastic panels).
2) Position panel back in place and hand-start each titanium fastener with the included washer.
3) Tighten the fasteners and enjoy. Note, each fastener needs "snugged" in place...the back-side of each well nut will "bulge" holding the panel in place.
Why ZSPEC's Dress Up Bolts® hardware solution?
- Grade-5 Titanium Fasteners and Washers
- Completely reversible (no drilling like others)
Requires basic hand-tools for installation: plastic pry tool to remove clips and #5 hex-key for installation of the ZSPEC hardware (not included).
Note - this M5 solution works best with holes ~9.4-9.5mm in diameter. If your need varies greatly, check out our other listings with alternate sizes.
Common (known) fitments/use for this size: Nissan 350z front bumper edge (where it connects to the radiator air-guide/cover).
- Regular price
- $5.10
- Regular price
- $5.10
Many manufacturer's have implemented an increasing amount of plastic "paneling" over areas of a vehicle's engine-bay and the clips often break or get marred-up when being removed. These clips, while not overly expensive in some cases are an ongoing headache and never look "good".
ZSPEC has developed clip-replacement solutions leveraging our famous titanium hardware coupled with Well Nuts. This solution is our "M5" based fastener and well nut hardware - VERIFY the hole-size before ordering, we offer another smaller "M4" and "M3" versions as well.
Installation instructions:
1) Remove OE plastic clips and push ZSPEC Well Nuts into Clip Holes on body of vehicle (under plastic panels).
2) Position panel back in place and hand-start each titanium fastener with the included washer.
3) Tighten the fasteners and enjoy. Note, each fastener needs "snugged" in place...the back-side of each well nut will "bulge" holding the panel in place.
Why ZSPEC's Dress Up Bolts® hardware solution?
- Grade-5 Titanium Fasteners and Washers
- Completely reversible (no drilling like others)
Requires basic hand-tools for installation: plastic pry tool to remove clips and #5 hex-key for installation of the ZSPEC hardware (not included).
Note - this M5 solution works best with holes ~9.4-9.5mm in diameter. If your need varies greatly, check out our other listings with alternate sizes.
Common (known) fitments/use for this size: Nissan 350z front bumper edge (where it connects to the radiator air-guide/cover).
