-
files/R1108-3-inches-rear-axle-simple-swap-small-tube-9-dana-44hd-toyota-image-1-ruffstuff-specialties.webp
3" Rear Axle Simple Swap (Small Tube 9", Dana 44HD, Toyota)
Quick, no-fluff solution for leaf spring axle swaps
This 3" Rear Axle Simple Swap Kit is the essential foundation for installing a small-tube 9", Dana 44HD, or Toyota axle in a spring-over application. Designed for ease and strength, it’s ideal for rigs running 2.5" or 2.75" wide springs and 3" diameter axle tubes. Whether you're doing a budget-friendly axle swap or building from scratch, this kit gives you the must-haves—no fluff, just the basics done right.
Included are our proven 3/8" thick A50 steel U-bolt plates with three center pin mounting options, our anti-wrap spring perches, long 10" U-bolts with heavy-duty hardware, and a set of 1.5" ID weld-on shock brackets. Everything arrives ready for welding and install. If you're looking to upgrade your rear axle setup without going overboard, this kit is where you start.
Key Features:
- Part Number: R1108
- Designed for 3" axle tubes (small tube Ford 9", Dana 44HD, Toyota)
- Works with 2.5" or 2.75" wide leaf springs
- U-bolt plates include 3 pin mounting positions for adjustability
- Shock brackets sized for 1.5" ID mounts
- Pre-cut, weld-on components made from high-quality steel
What's Included:
- (2) Leaf Spring Plates for 2.5" or 2.75" springs
- (2) Spring Perches for 3" axle tube and 2.5" or 2.75" spring width
- (2) Weld-on Shock Brackets (1.5" ID)
- (4) U-bolts: 10" x 5/8" x 3" with fine thread hardware and hardened washers
Pair this setup with a Ruffstuff diff cover, disc brake brackets, or a pinion guard for a fully dialed-in axle swap. It's the perfect starting point for your custom leaf spring suspension.
- Regular price
- $119.70
3" Rear Axle Simple Swap (Small Tube 9", Dana 44HD, Toyota)
Quick, no-fluff solution for leaf spring axle swaps
This 3" Rear Axle Simple Swap Kit is the essential foundation for installing a small-tube 9", Dana 44HD, or Toyota axle in a spring-over application. Designed for ease and strength, it’s ideal for rigs running 2.5" or 2.75" wide springs and 3" diameter axle tubes. Whether you're doing a budget-friendly axle swap or building from scratch, this kit gives you the must-haves—no fluff, just the basics done right.
Included are our proven 3/8" thick A50 steel U-bolt plates with three center pin mounting options, our anti-wrap spring perches, long 10" U-bolts with heavy-duty hardware, and a set of 1.5" ID weld-on shock brackets. Everything arrives ready for welding and install. If you're looking to upgrade your rear axle setup without going overboard, this kit is where you start.
Key Features:
- Part Number: R1108
- Designed for 3" axle tubes (small tube Ford 9", Dana 44HD, Toyota)
- Works with 2.5" or 2.75" wide leaf springs
- U-bolt plates include 3 pin mounting positions for adjustability
- Shock brackets sized for 1.5" ID mounts
- Pre-cut, weld-on components made from high-quality steel
What's Included:
- (2) Leaf Spring Plates for 2.5" or 2.75" springs
- (2) Spring Perches for 3" axle tube and 2.5" or 2.75" spring width
- (2) Weld-on Shock Brackets (1.5" ID)
- (4) U-bolts: 10" x 5/8" x 3" with fine thread hardware and hardened washers
Pair this setup with a Ruffstuff diff cover, disc brake brackets, or a pinion guard for a fully dialed-in axle swap. It's the perfect starting point for your custom leaf spring suspension.
